Jump to content

  • Welcome!

    Register and log in easily with Twitter or Google accounts!

    Or simply create a new Huddle account. 

    Members receive fewer ads , access our dark theme, and the ability to join the discussion!

     

Electrical help

The Watcher

By The Watcher,
in Huddle Lounge

Recommended Posts

The Watcher Newbie

The Watcher

Posted
Posted

So after a recent storm, and very close lightning strike we have three outlets that won't work.

The strike fried a few things, our garage door opener among them (had to replace the whole unit.) It tripped a few other GFCI lines, but they all reset.

One of the three dead ones is a GFCI outlet on the front porch. The other two are regular receptacles inside the garage, on the porch side, and have stickers saying that they are fed from a GFCI line.

My assumption is that they are all on the same breaker/line. What I assume is the correct breaker in the panel is labeled as "Garage Recepts." It is not tripped, and I tested it in the panel and it is putting out around 120 Volts like it is supposed to. It is a regular 20A breaker.

I bought a new GFCI outlet for the porch and replaced it. It won't reset, and I still can't get power to any of the three outlets.

Suggestions? Short in one of the other two regular receptacles? Bad new GFCI off the shelf? Burnt up wire?

This is the only GFCI outlet we have outside, and the only other outside outlet is a normal one, and it has power.

 

 

Link to comment
Share on other sites
The Watcher Newbie

The Watcher

Posted
  • Author
Posted
10 hours ago, cookinbrak said:

Hook up the GFCI without hooking up the line side. If it doesn't trip, hook up the other outlets one at a time to isolate where a short could be. (Don't unhook everything, just the hot wire. Check the GFCI, then the first outlet, then the second.)

Hi there.

This confused me a little. The old GFCI was wired to the line side, so that's how I hooked up the new one. The on-receptacle GFCI breaker won't reset. In fact, it doesn't seem like I even have hot power to the wires going to the outlet.

That made me think there was another GFCI somewhere upstream between this outlet and the breaker in the panel. The problem there is that I don't see/can't find anything else not working besides these three outlets.

Shouldn't the GFCI be the first outlet on the line, if it indeed feeds/protects the other two in the garage that are dead?

Link to comment
Share on other sites
The Watcher Newbie

The Watcher

Posted
  • Author
Posted
11 minutes ago, cookinbrak said:

I don't know why I said line, it's line in, load out. Just hook up the gfci and make sure it works. Then you can start isolating and tracing.

I'm actually starting to think it might be a bigger problem. Something in the in-wall wiring burnt up, or something incorrectly wired from the time it was built.

I can't recall every using the outlets on that side of the inside of the garage, but I am sure we have. I know for a fact that the GFCI on the porch worked before the lightning strike. It is just weird that all three are now out, and I can't get the new GFCI outlet to reset/have power.

There is only three wires in the GFCI box. A hot, neutral, and ground. When I unhooked the old one, it was hooked up on the line side, so I hooked it back up the same way when I put the new one in.

It doesn't seem like I've even got power to the back of the outlet. The GFCI won't reset, so I put the tester up to the wires on both sides of the outlet and it isn't showing any voltage coming in.

If the GFCI is indeed on the circuit that the other two receptacles in the garage are on, shouldn't it be feeding them via the load, or at least more than three wires in the GFCI box? Could the breaker show good in testing, even if it was bad? (I tested the post on the breaker and the ground/neutral strap in the panel, and all breakers show around 120v)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • PMH4OWPW7JD2TDGWZKTOYL2T3E.jpg

  • Topics

  • Posts

    • 45catfan
      Jaycee LOCKDOWN Horn is due for a breakout year

      By 45catfan · Posted

      Ha-ha, I bet that went through everyone's mind.  Admittedly I don't read all the comments in a thread before I make a post. Great minds think alike!
    • OneBadCat
      An honest look at Bryce Young

      By OneBadCat · Posted

      Cam was hitting his stride as a QB in 2017/2018.     This is why I think stats like completion percentage are overrated. As long as a QB is clutch and makes the throws to win the game the rest doesn’t really matter. What good is a check down stat padder if they’re a choker.  Until Norv Turner (and briefly Chud) got here we put Cam in high pressure throwing situations all the time. We also ran the ball on first down more than most teams in the NFL in the Ron era. Coupled with shitty WRs, all that is expressed in his stats. I also assume Cam took the ball in his hands on many occasions rather than trust Funchess to catch the ball.    It was also never Cams job to play the game like someone else. His presence on the field dictated the game in a way that is rarely seen.  He showed he could play the dink and dunk game just before TJ Watt. That didn’t suddenly make him better than his earlier seasons. He just got put in a legit under center  passing game again for first time since his rookie year with Chud.    Ron took the quickest path to success and abused the RPO because his ass was about to get fired.    Cam never got the credit for being the cerebral player that he was. I just think when you are legitimately a human Superman, sometimes the best play is having the ball in your hands. He was a better passer than Delhomme was. 
    • jfra78
      An honest look at Bryce Young

      By jfra78 · Posted

      I don't think Canales has any problem benching Bryce or moving on if Bryce doesn't come out playing like the end of last year.  It's year 3 no more excuses for Bryce
×
×
  • Create New...