Jump to content
  • Welcome!

    Register and log in easily with Twitter or Google accounts!

    Or simply create a new Huddle account. 

    Members receive fewer ads , access our dark theme, and the ability to join the discussion!

     

Can You Interchange Batteries On A Cordless Drill?


Shufdog

Recommended Posts

I have a 14.4v cordless drill with a dead battery (it won't recharge). I went to Lowe's and they didn't have the 14.4v batteries, just 12v and 18v. Do any of you know if I can run the drill safely on a 18v battery?

Dont forget to check the type of battery also, that is the most important

. The different types are

Ni-Cad (nickel cadmium)

NiMH (nickel metal hydride) most common and being phased out for next type

Li-Ion (Lithium Ion)

A regular 18v NiMH battery is less powerful than a 14v Li-ion, so look at the cost of a new Li-ion drill before spending money's on a NIMH battery. For example, you might be able to get a 14v Li-ion drill for $60-$90 as opposed to a 14.4v NiMH that could cost $45. Prices have come down on batteries and Internet will be best place to get the best price, but just consider switching to new more powerful and longer lasting Li-Iom if it's not a lot more money.

I personally bought the Hilti 14.4v Li-Ion impact drill and it's half the size of my Hilti 18V NiMH, half the weight, has LED light built into tip that light when you press trigger, it lasts at least 50% longer than 18v, and is a little bit more powerful. Hilti is lot more expensive than other brands and you can get a Bosch or Milwaukee with same Li-Ion technology and same feature for a fraction of the price of Hilti

Link to comment
Share on other sites

Dont forget to check the type of battery also, that is the most important

. The different types are

Ni-Cad (nickel cadmium)

NiMH (nickel metal hydride) most common and being phased out for next type

Li-Ion (Lithium Ion)

A regular 18v NiMH battery is less powerful than a 14v Li-ion, so look at the cost of a new Li-ion drill before spending money's on a NIMH battery. For example, you might be able to get a 14v Li-ion drill for $60-$90 as opposed to a 14.4v NiMH that could cost $45. Prices have come down on batteries and Internet will be best place to get the best price, but just consider switching to new more powerful and longer lasting Li-Iom if it's not a lot more money.

I personally bought the Hilti 14.4v Li-Ion impact drill and it's half the size of my Hilti 18V NiMH, half the weight, has LED light built into tip that light when you press trigger, it lasts at least 50% longer than 18v, and is a little bit more powerful. Hilti is lot more expensive than other brands and you can get a Bosch or Milwaukee with same Li-Ion technology and same feature for a fraction of the price of Hilti

eat a dick.

Link to comment
Share on other sites

alejandro doing his damnedest to erase the shame of his reputation by becoming a respected member of the forums

great lifetime movie plot

eat a dick.

Stalking my posts Phil? I saw a question and read Mr."eat a dick's" bullshit answer and go to pawn store advice and decided to give the OP a real answer! Replacing a 14.4 v with a 12v will NOT burn it up. Because of the progression of batteries, 99.9% 14.4v NiMH drills won't accept the tooth arrangement of the 18V. If you do find one of the few exceptions dewault / black and decker drills that do, they should still be ok as long as there are 2.0 amp and not 3.0 amp or higher.

Link to comment
Share on other sites

Check out if your town has a Batteries Plus place. They can perform a "Flush" on old batteries that can save some of them. They can also get just about any bettery you need.

http://www.batteries...t-storeloc.aspx

http://www.batteries...-Batteries.aspx

Or check ebay. There's a listing for repair of cordless drill batteries.

http://www.ebay.com/itm/BATTERY-FIX-V-for-Bosch-12v-14-4-18-volt-cordless-drill-/270946270323?pt=US_Texbook_Education&hash=item3f15a7fc73

Link to comment
Share on other sites

Stalking my posts Phil? I saw a question and read Mr."eat a dick's" bullshit answer and go to pawn store advice and decided to give the OP a real answer! Replacing a 14.4 v with a 12v will NOT burn it up. Because of the progression of batteries, 99.9% 14.4v NiMH drills won't accept the tooth arrangement of the 18V. If you do find one of the few exceptions dewault / black and decker drills that do, they should still be ok as long as there are 2.0 amp and not 3.0 amp or higher.

Like anyone is going to listen to you.

Link to comment
Share on other sites

If you want to save the $5 from the eBay auction, just watch the info here for free. Keep in mind this is a trick for NiCD batteries, which unless your drill is really old, it will be a NiMH

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


  • PMH4OWPW7JD2TDGWZKTOYL2T3E.jpg

  • Topics

  • Posts

    • You may be interested to know that the average depth of separation is dependent upon the type of route run. Though go-routes are the most type of route run, they also produce the least amount of separation (and, of course, completions).   "The average pass catcher runs a go route on nearly a quarter of all routes (22.3%), the highest percentage of any route type in our data. However, those routes are targeted roughly 1 out of 10 times (10.8 percent), the lowest target rate of any route. The WR screen is the least-run route (3.4%), and it's the only route where the average target is behind the line of scrimmage. But it's also targeted at the highest rate (40.7%) and early in the play (1.6 seconds average time to throw). The most targeted routes outside of the WR Screen? The out (27.8%) and slant (25.2%) routes are the next most popular across the league."     "The most valuable routes by expected points added per target were the post (+0.48) and corner (+0.43) routes. The go route (+0.19) ranked seventh on the list of 10 route types. The go route (+0.19) ranked seventh on the list of 10 route types. One possible reason for this: It's harder to separate on go routes, which put the player on a straight path, than on posts or corners, which ask the player to make a cut. Targeted pass catchers on posts and corners average 2.4 yards and 2.3 yards of separation from the nearest defender, respectively, while pass catchers targeted on go routes average just 1.8 yards of separation."   https://www.nfl.com/news/next-gen-stats-intro-to-new-route-recognition-model#:~:text=Targeted pass catchers on posts,) and slant (+0.26).   I would expect that Thielen would have an easier time catching the ball based that he runs the routes where it's easier to get open. Tet? Yet to be seen, but we may be better served getting him on some slants and crossers also.  In general, receivers are going to average a lower completion percentage and yards of separation on certain types of routes than others, that's why we shouldn't necessarily be taking stats, even advanced ones, at face value, as there are dynamics that most aren't even thinking about.  In terms of Tet, he's bigger and somewhat slower than a smaller dude, so you'd expect him not to have as much separation on go-routes, but his catch radius is massive and his hands are awesome. Hitting him in stride will probably be killer, but of course QBs are less accurate on go-routes according to the stats. Depending upon Tet's route versatility and how he is used, we could have a unicorn though. He's relatively fast, has great hands and gets YAC (and on an off note, if X can hold on to the ball, he's dangerous as well because he already has shown some separation ability).    
    • Most elite WRs aren't necessarily burners. Not a lot of elite WRs in the modern era were 4.3 guys. If anything, sometimes it seems like the super fast guys use their speed as a crutch and it hampers their development in the intricacies of route running.
×
×
  • Create New...