Jump to content
  • Welcome!

    Register and log in easily with Twitter or Google accounts!

    Or simply create a new Huddle account. 

    Members receive fewer ads , access our dark theme, and the ability to join the discussion!

     

Garage door experts?


Bronn

Recommended Posts

Anyone had much experience working with garage doors?

The powerhead on our unit was acting up earlier in the week. Turns out, I needed to reset the limits for some reason. In the process, I got the motor too hot and it cut power to the whole unit (wall switch and threshold safety beam) until I let it cool down a while. Also in the process of removing the back panel to inspect for potential issues, I think I damaged the MHz receiver board. I found a small component that seemed like it had one of it's posts pulled out of the board. I even tried to reattach, but I am still having the below issue.

Basically, my wife's Homelink wouldn't reprogram. Then I found out our visor clips wouldn't program.

Per instructions on YouTube and the web, I've cleared the receiver's memory by holding down the "Learn" button for a while. But I just couldn't get it to then recognize any of our transmitters.

The "Learn" button and the LED seem to be working fine, it just isn't learning the transmissions of our devices.

I've ordered a replacement receiver board. I hope that is all it takes to get it working again.

Meanwhile, our wall switch is operating the door fine. We're just having to pull the vehicle out, go in and close the door via wall switch inside the garage, and then go back out to the vehicle through the front door of the house.

The door drive is a Genie Pro Screw Drive and is about 12 years old. But I would rather spend $44 on this board, if it fixes it, than $200 plus for a new powerhead/operator.

Anyone with any experience with these doors or a similar issue?

Thanks!

Link to comment
Share on other sites

Sheesh for someone who is needing help you seem to your poo. I guarantee you know more about garage doors than I know about anything. What the fug is a MHz receiver board anyway? I got the dumbs

I only learned it because I am trying the DIY repair method lol...

basically, this:

91jnkln1EFL._SL1500_.jpg

It is what reads the signal your visor clip opener device, or Homelink system, is sending out to open up your garage door when you pull into your driveway.

When I opened the powerhead up it was surprising how not-so-complex it was. It has a main circuit board, a motor, this receiver board, a power supply, and a capacitor.

I just hope that my theory that it is this one board is correct. It should take like 2 minutes to install once it arrives. There is a plug to connect it to the powerhead, and screw to hold it into place.

Link to comment
Share on other sites

Do you have a multi-meter or Flute Tool? It's really simple to test the circuitry of the system. Unfortunately, I doubt the only thing you fried is the receiver board.

Everything works fine, minus the receiver. The door now functions as normal via the wall switch. The only thing that doesn't work is the receiver.

Link to comment
Share on other sites

Ouch!

As an update, my new board arrived yesterday. I hooked it up and it programmed the receivers. Job complete, and it cost me @ $45.

GL with your chains, Salty... I hate to hear your door is broke now. It's a PITA doing workarounds until you can get it repaired.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


  • PMH4OWPW7JD2TDGWZKTOYL2T3E.jpg

  • Topics

  • Posts

    • What's wrong with Damien Lewis? He played pretty well last year.
    • Official NFL Cuts Tracker Deadline for roster cuts is Tuesday, August 26th. At this moment (Friday, August 22nd) the only interesting names I see are... K Caden Davis (BUF) RB Ameer Abdullah (SF) WR Equanimeous St. Brown (SF) WR Donovan Peoples-Jones (NO) LB Khaleke Hudson (TEN) Abdullah, St. Brown, Peoples-Jones I don't exactly think we should cut anybody for but it was just interesting seeing those names. Khaleke Hudson was on the Panthers' practice squad last year I believe and might have even gotten called up? And of course, Caden Davis just because of the question mark at kicker this season for the team.
    • I'll say 6/10. I don't know that we learned a whole lot about this team during preseason that we didn't already know. We didn't play the starters enough to really get a feel for what to expect. We had one good drive against the Browns, one 3-and-out and two 3-and-outs against the Texans. That's an extremely small sample size across 3 games regardless of performance. My camp/preseason takeaways: Jalen Coker might be the best WR on this team and is certainly no worse than #2. Nic Scourton is going to be a good player for us. Possibly very good. Bobby Brown was our best free agent addition. Jack Plummer isn't an NFL QB. Not even a practice squad guy. Having anyone other than Canales and Evero call plays was a really stupid and pointless idea. Our depth is largely non-existent, especially on defense. The three areas we actually DO have depth are on the OL, in the WR corp. and at RB. I can't fathom why Dan Morgan didn't do more to upgrade ILB during the offseason. We better hope Lathan Ransom steps up at FS because if he doesn't we have a massive hole. For all the hype surrounding Sanders/Evans, Tommy Tremble is still the best TE on the roster. I'm only slightly less enthusiastic going into the regular season than I was a month ago. I think our starters on offense are solid and we should be pretty good there unless Bryce totally regresses. On defense, we're probably bottom 3rd in the league if 100% healthy and significantly worse than that if injuries become an issue. We badly need at least two of our rookies to become high-level players early (ideally one of the pass rushers + Ransom) and at least 2 of our free agent additions (ideally Moehrig + Bobby Brown) to be significant upgrades over last year. Call me pessimistically optimistic 😆
×
×
  • Create New...